What Should I Do If An Appliance Fails The Pat Test?

People often get troubled when electrical appliances fail the Pat safety test. They are unaware of what to do next when the pat testing fails. Google search has revealed that more and more people are searching for what to do with their appliances when they fail this safety test. Here is our suggestion of how you can utilise the appliances and devices.

The first probable practice would be to disconnect the faulty equipment from the power source, remove them from service and quarantine them. You can consider taking them to an expert for repair. You can alternatively look for an expert to assess and evaluate them to determine if they are faulty. Disposing of them can be an option if they are declared faulty and unsafe to use.

Adoption

You might consider adopting this equipment or devices to complete on underway tasks. However, be sure to remain compliant with the legal requirements in your area, some regions have tough laws on pat testing and its compliance.

You do not need to rush disposing of the appliances that have failed the Pat test; it is good to do varying tests and look at look at all possible reason why the appliance might be failing the test. Some of the reason for failed testing might include use of wrong equipment for the appliance type, improperly calibrated equipment and use of old PAT testing equipment. Sometimes the Pat testers could be amateur or incompetent, and therefore they might be doing it all wrong.

Professional Tester

It is crucial to liaise with a professional pat tester or service providers to address the failed process and appliance. Such personnel will interpret results and certify if they are safe for use. When the professional pat testers confirm that the appliances are unfit for use, they will have to be removed from service immediately and the supervisors and users suitably notified. The tester will have to be sure to the right testing equipment; tests and testing conditions must be the most suitable with the appliance.

When the appliance is tested its mandatory to indicate with labels that they have been tested, marking them as pass or fail using high-quality labels and ink is a requirement in most countries.

The appliances that have failed the tests and the subsequent alternatives should be marked with a red label and explicitly indicated that they unsafe for us. Labelling is very important in preventing serious mishaps especially when you are handling portable appliances at the workplace.

Resistance Test

Often appliances need to put to insulation resistance test; this ensures that the appliances have live parts sufficiently insulated, if this equipment and devices fail on the earth bond test, which comes before insulation test then you should not proceed to do the insulation resistance test. All electrical appliances should be tested of extension leads with surge protection.

Testing is done according to the class of equipment. When an appliance does not have a rating plate, it will fail the pat testing; it is also critical to establish the housing of the appliance, those that have plastic housing may be possible to carry an earth continuity test on them. You may need to do the insulation resistance test with them before undertaking the Pat test.

Legal Requirement

Therefore, when the Pat test fails, you will need to do subsequent tests to ensure is really the appliance are faulty. You will need to hire or consult a professional pat tester or services provider to rule on the condition of the appliance. They are really faulty and unsafe for use; you will have to dispose or quarantine them from being in use. You might also consider taking them in to finish some pending tasks or projects. You can repair the failed devices. However, be sure to use varying testers before arriving at a conclusion. Pat testing is a legal requirement in most regions, therefore every company need to have the best procedure on how to undertake it and adhere to it.